|
Re: 1969 K200B-2 update [message #19513 is a reply to message #19512] |
Thu, 10 October 2013 00:46 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
chicagobill
Messages: 2005 Registered: April 2003
|
Senior Member |
|
|
Congrats on the new baby! What were the date codes on the speakers?
The single footswitch was made by Peavey and will not really work with the reverb and vibrato.
|
|
|
|
|
|
Re: 1969 K200B-2 update [message #19521 is a reply to message #19512] |
Thu, 10 October 2013 11:38 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
chicagobill
Messages: 2005 Registered: April 2003
|
Senior Member |
|
|
The original footswitch was one of the round dome shaped ones with two switches and a grey cable that has a 1/4" stereo plug on the end.
Who knows why the second speaker jack was installed, was the wiring to the speakers disturbed? It could have been to add a second output to a second cabinet, or it could have been to make the cabinet stereo, etc.
I know that sometimes there is enough extra vinyl inside the back panel to get make a patch, or from under the caster plates, etc.
|
|
|
Re: 1969 K200B-2 update [message #19522 is a reply to message #19521] |
Thu, 10 October 2013 16:02 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) |
Kustom_Bart
Messages: 601 Registered: October 2010 Location: Greenville, MichiGUN
|
Senior Member |
|
|
Any 2 button switch with a stereo 1/4 end on it will work. I have used Fender, Peavey, Marshall, etc. pedals. Just stereo 1/4" end with 2 buttons is the key.
|
|
|