VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Kustom 50-2 Reverb (Potentiometer Repair)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Kustom 50-2 Reverb [message #28557] Tue, 26 April 2022 06:56
jammy5152 is currently offline  jammy5152
Messages: 62
Registered: May 2018
Location: Georgia
Member
I bought a push/pull potentiometer off EBay and disassembled my broken Vib / Tremelo pot from my 50-2 amp and installed the parts from the new pot into the old pot body ( the 3 solder terminals on the new one did not line up with the board holes ) and re-soldered it back to the board...cleaned all pots and installed 3 prong cord...cut shaft of new pot ( to long) ...installed temporary knob with screw until I find one that looks like Kustom knob(screw clamp knob) ....Works great...
Reverb seems to be not deep enough though... Any thoughts....Cleaned RCA JACKS....REVERB echos when amp is moved a little...

[Updated on: Tue, 26 April 2022 13:42]

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Kustom 50-2 Amp Ground Cord
Next Topic: Reverb K50-2 Reverb Repair
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Mon Nov 04 08:37:34 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software