VintageKustom.com: Repairing Kustom Amps » Kustom III lead pc board 5065 rev2

Home » VintageKustom.com » Repairing Kustom Amps » Kustom III lead pc board 5065 rev2 (mystery resistor)

Show: Today's Messages :: Polls :: Message Navigator

Re: Kustom III lead pc board 5065 rev2 [message #27365 is a reply to message #27364]

Fri, 07 June 2019 09:50

podbaydoors
Messages: 7
Registered: June 2019

Junior Member

Thanks for doing that!
This is the first Kustom I have had since the late 90's.
This is in fact the first SolidState guitar oriented head since I had an Acoustic head back in the late 70's.
With the Acoustic I used a bogen tube mic mixer ahead of the input for a distortion more pleasing than the head's internal drive.
This thing is quite the powerhouse and so should be a lot of fun after replacement of all the aged electrolytic caps.
The quality of construction is amazing when compared to current consumer level gear.
I recently was asked to look at a co-worker's Fender Champion amplifier.
The pots were soldered directly onto the board!
When it had been tipped forward ( like that's not gonna happen ) the pot leads tore themselves off the circuit board traces.
After all the broken traces had been jumpered it worked fine again, but wouldn't you think someone in a focus group would have pointed it out?
This head on the other hand is typical of high quality robust service oriented design.
I'm really looking forward to the stares of disbelief when I haul this little surprise out for it's coming out party!

Best,

Lou

Report message to a moderator

[Message index]

		Kustom III lead pc board 5065 rev2 By: podbaydoors on Wed, 05 June 2019 10:19
		Re: Kustom III lead pc board 5065 rev2 By: stevem on Wed, 05 June 2019 12:28
		Re: Kustom III lead pc board 5065 rev2 By: podbaydoors on Wed, 05 June 2019 12:34
		Re: Kustom III lead pc board 5065 rev2 By: chicagobill on Wed, 05 June 2019 23:48
		Re: Kustom III lead pc board 5065 rev2 By: stevem on Thu, 06 June 2019 07:19
		Re: Kustom III lead pc board 5065 rev2 By: podbaydoors on Thu, 06 June 2019 22:11
		Re: Kustom III lead pc board 5065 rev2 By: stevem on Fri, 07 June 2019 09:06
		Re: Kustom III lead pc board 5065 rev2 By: podbaydoors on Fri, 07 June 2019 09:50
		Re: Kustom III lead pc board 5065 rev2 By: stevem on Fri, 07 June 2019 12:32
		Re: Kustom III lead pc board 5065 rev2 By: chicagobill on Fri, 07 June 2019 15:36
		Re: Kustom III lead pc board 5065 rev2 By: podbaydoors on Fri, 07 June 2019 16:26
		Re: Kustom III lead pc board 5065 rev2 By: thetragichero on Fri, 07 June 2019 21:43
		Re: Kustom III lead pc board 5065 rev2 By: chicagobill on Fri, 07 June 2019 23:16
		Re: Kustom III lead pc board 5065 rev2 By: thetragichero on Sat, 08 June 2019 07:58
		Re: Kustom III lead pc board 5065 rev2 By: stevem on Sun, 09 June 2019 05:45
		Re: Kustom III lead pc board 5065 rev2 By: stevem on Sun, 09 June 2019 09:21
		Re: Kustom III lead pc board 5065 rev2 By: podbaydoors on Sun, 09 June 2019 12:30
		Re: Kustom III lead pc board 5065 rev2 By: podbaydoors on Fri, 14 June 2019 22:17
		Re: Kustom III lead pc board 5065 rev2 By: stevem on Sat, 15 June 2019 06:23

Previous Topic:	Kustom 100 blowing fuse
Next Topic:	Troubleshooting a 250 model 1 Bass amp

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Mon Nov 18 08:42:37 EST 2024