VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » K200A-1 Power Amp Rescue Needed (Serial Number 20466)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: K200A-1 Power Amp Rescue Needed [message #27260 is a reply to message #27251] Sun, 21 April 2019 06:06 Go to previous messageGo to previous message
stevem is currently offline  stevem
Messages: 4778
Registered: June 2004
Location: NY
Senior Member
Yes, the sperate pc502 and pc602 are only used in the A serise amp, in the B series amps they where put on the pc703 board which is a combo regulator and driver board.

The A model preamps run on a + and - 23 volts and as in the later B series amps the negitive regulators output tracks the positive regulator.

This all means that the - 23 volts will never be correct if the positive regulators output is not right.
Both of these boards have 15 volt electrolytic caps that will short out if Transistors on the board are bad and thus smack the caps with way more voltage then they are rated at..

Note that if you go into our tech section and choose the pc board listing you will atleast find schematics for all the versions of your 702 board and the schematic for a 502 board which it would seem your missing!

I guess you can bread board yourself one, but first let's get the amps driver and output stage up and running.

Just for now I would unhook the 34 volt power supply wire from the regulator board that you do have .

PS, by the way there's no such thing as a vintage era Kustom bass head, they where just non effects heads and had a normal and brite channel.

[Updated on: Sun, 21 April 2019 06:25]

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Challenger Reverb Problem
Next Topic: Kustom 100 blowing fuse
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun Dec 29 19:44:32 EST 2024