VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » K200A-1 Power Amp Rescue Needed (Serial Number 20466)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: K200A-1 Power Amp Rescue Needed [message #27307 is a reply to message #27251] Fri, 10 May 2019 12:07 Go to previous messageGo to previous message
chicagobill
Messages: 2010
Registered: April 2003
Senior Member
The driver transistors are welded to the heat sinks. If you place them leg side up on your bench, you can hit the bottom of the transistor case with a large screwdriver and the transistor will break free from the heatsink.

I then use a tapered reamer to slightly open up the hole in the heatsink so that a new transistor can be pushed in from the bottom. I will tack solder the new transistor's case to the heatsink.

The simplest light bulb limiter can be made from a wired lamp socket, you know the kind of socket with the wires already attached and two insulated alligator clips. Put an alligator clip on each of the two socket wires. Then use the clips to attach the bulb to the two terminals of the fuse holder, so that the light bulb replaces the blown fuse.

100 watt incandescent lamps are difficult to find, I'd just use a 60 watt one that are still being sold everywhere.

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Challenger Reverb Problem
Next Topic: Kustom 100 blowing fuse
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun Dec 29 13:25:11 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software