VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » K150-6 pumps out DC voltage when powered on.
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: K150-6 pumps out DC voltage when powered on. [message #27688 is a reply to message #23707] Thu, 27 February 2020 21:28 Go to previous messageGo to previous message
corybrown is currently offline  corybrown
Messages: 51
Registered: August 2015
Member
Okay. I finally got to take some measurements when it was acting up.

Red wire at filter can +43V
Green wire at filter can -43V

Red wire from input board to power amp board +8V
Green wire from input board to power amp board -8V

Q12 at the collector +43V
Q16 at the collector -8V

Q5 at the collector +43V
Q6 at the collector -43V

I'm not sure which one on the bracket is Q18 and which one is Q19 but when looking down at the bracket from behind the chassis
Left transistor Red Wire +43V Blue wire -27V yellow wire -27V
Right transistor Red Wire +27 Blue wire -43V yellow wire -43V

Not sure what else to measure. Does that give you any ideas?
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: K100 2 Questions
Next Topic: Reducing the high frequency hiss on Frankie heads
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun Nov 17 19:13:15 EST 2024