Kustom K 50-2 Parts [message #27871] |
Sun, 04 October 2020 18:04 ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
jammy5152
Messages: 61 Registered: May 2018 Location: Georgia
|
Member |
![jtweedell%40att.net](/FUDforum/theme/vk30/images/yahoo.png)
|
|
Hey
I'm new here and was wondering if someone has a Vibrato/ Tremelo Potentiometer and Knob for my K50-2 Combo or
a place to purchase one?? The shaft was broke off when the amp was given to me for free....
It is in great shape ( no burns or tears or scuff anywhere ) and it has the Original Kustom Logo imprinted Cover for the amp......
Please let me know where I can get this part......Any help would be appreciated
[Updated on: Sun, 04 October 2020 19:35] Report message to a moderator
|
|
|
|
|
|
Re: Kustom K 50-2 Parts [message #27880 is a reply to message #27871] |
Wed, 07 October 2020 06:58 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
stevem
Messages: 4772 Registered: June 2004 Location: NY
|
Senior Member |
|
|
The Antique electonics pot / switch is part number R-V520GIB.
The switch section on this pot extends 5/8" off the rear of the pot so you need that amount of clearance.
The switch section on it is double pole double throw type with the center terminal on either row of 3 being common.
There are therefore two sets of switch terminals that can be used for the on/ off function the amp needs.
This pot will need to be hard wired to the board since it is not a circuit board mount type.
[Updated on: Wed, 07 October 2020 06:59] Report message to a moderator
|
|
|
|
|
|
|
|