VintageKustom.com: Repairing Kustom Amps » K200A Head Cabinet Questions

Home » VintageKustom.com » Repairing Kustom Amps » K200A Head Cabinet Questions

Show: Today's Messages :: Polls :: Message Navigator

K200A Head Cabinet Questions [message #24236]

Sun, 20 December 2015 17:00

mister honey
Messages: 38
Registered: January 2014
Location: eastern blowville heights...

Member

I'm looking for a photo of or dimensions for the wood support blocks inside a K200A head cabinet, that pleat mentions in this old post from December 2012:

"Which K200 head case are you looking for? There is a difference between the K200A series and K200B series cases. A series are about a half inch shallower in the depth of the A models. Bolt patterns are different and there are wood block spacers on the A models to help support the tranny and power transistors."
pleat

Also, what type of bolts were used to attach the K200A chassis into the head cabinet? Flat head, round head, hex head?

Thanks!

Mike

Report message to a moderator

[Message index]

		K200A Head Cabinet Questions By: mister honey on Sun, 20 December 2015 17:00
		Re: K200A Head Cabinet Questions By: pleat on Sun, 20 December 2015 20:05
		Re: K200A Head Cabinet Questions By: stevem on Mon, 21 December 2015 06:17
		Re: K200A Head Cabinet Questions By: mister honey on Mon, 21 December 2015 08:24
		Re: K200A Head Cabinet Questions By: chicagobill on Mon, 21 December 2015 15:51
		Re: K200A Head Cabinet Questions By: Iowa Boy on Mon, 21 December 2015 17:43
		Re: K200A Head Cabinet Questions By: pleat on Mon, 21 December 2015 21:05
		Re: K200A Head Cabinet Questions By: mister honey on Wed, 30 December 2015 13:02
		Re: K200A Head Cabinet Questions By: carlc on Wed, 30 December 2015 16:17
		Re: K200A Head Cabinet Questions By: Iowa Boy on Wed, 30 December 2015 23:17

Previous Topic:	Burnt PC900
Next Topic:	Frankenstein Head: replacement cap values

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jul 31 14:40:07 EDT 2024