| Kasino concert [message #28963] |
Mon, 06 March 2023 11:25  |
brokenwheel
Messages: 5
Registered: February 2023
|
Junior Member |
|
|
i cut this off the power switch is this the correct !!! Now i have a loud hum or buzzzzzzz
i all so changed the power cord to a 3 prog grounding the ground leg to the chase
it apears to be a
.022 -600DC
+- 10% 225PX Or +- 10% 225Fx ??
this was sodered to the power switch to the chassie
AlSo
i do not have the Reverb tank Yet i did locat one and,
wondering how this would be mounted and,
is there any thing i need to know on the wiring the reverb back in ..
i would like to post a picture of what i did but it appears i can not just yet
thank you all
|
|
|
|
| Re: Kasino concert [message #28966 is a reply to message #28963] |
Tue, 07 March 2023 07:23  |
stevem
Messages: 4775
Registered: June 2004
Location: NY
|
Senior Member |
|
|
Hello.
Yes cutting out that .022 uf cap removes the polarity function and the chance of getting shocked, it will also produce a louder buzz sound when you hands are not touching the strings.
The Concert model was the PA head .
The reverb tank was hung upside down from two Aluminum tubes the spanded the tank and the amp from front to rear.
These ends of these tubes where crushed flat and drilled out so that 6/32 machine screws held the bars to the top of the chassis.
If you pm me your email I can send you pictures of what the set up looks like.
I have to approve your post until you have made 5 of them and then they will just go right up to the board.
[Updated on: Tue, 07 March 2023 07:25] Report message to a moderator |
|
|
|
VintageKustom.com
Search
Help
Members
Register
Login
Home
]