VintageKustom.com: Repairing Kustom Amps » Kustom 50-2 Amp Ground Cord

Home » VintageKustom.com » Repairing Kustom Amps » Kustom 50-2 Amp Ground Cord (Grounding Power Cord)

Show: Today's Messages :: Polls :: Message Navigator

Kustom 50-2 Amp Ground Cord [message #28540]

Mon, 18 April 2022 21:49

jammy5152
Messages: 61
Registered: May 2018
Location: Georgia

Member

Hey
I have replace the 2 prong power cord with a 3 prong power cord and noticed a cap that reads 0.22 uF/ 150 VAC
which is soldered to the middle leg of the switch with 1 lead and the other lead is grounded to a screw post on the back of the amp....
I'm using that ground post for my green wire now was wondering is that the " Death Cap" and should it be cut
out of the switch area...??
I have not turned it on yet while waiting for another part ...
This is a Kustom 50-2 amplifier...
Thanks

[Updated on: Mon, 18 April 2022 22:01]

Report message to a moderator

[Message index]

		Kustom 50-2 Amp Ground Cord By: jammy5152 on Mon, 18 April 2022 21:49
		Re: Kustom 50-2 Amp Ground Cord By: stevem on Tue, 19 April 2022 06:10
		Re: Kustom 50-2 Amp Ground Cord By: jammy5152 on Tue, 19 April 2022 07:22
		Re: Kustom 50-2 Amp Ground Cord By: stevem on Tue, 19 April 2022 10:16
		Re: Kustom 50-2 Amp Ground Cord By: jammy5152 on Tue, 19 April 2022 20:46

Previous Topic:	K50
Next Topic:	Kustom 50-2 Reverb

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Fri Aug 30 10:38:27 EDT 2024