VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » direct outs
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
direct outs [message #39] Mon, 01 May 2000 22:17
Anonymous
Here is a simple way to get a direct output on the smaller sc kustoms and the 100's. From the + output jack solder a 100K ohm resistor in series with a 6.8K ohm resistor to ground. Take a tap between the two resistors and that is your direct out for feeding slave amps, pa, or recording. I used this arrangement when I played a kustom challenger with a powered 410 kasino 100 watt cabinet. The head of kustom's service department gave me the tip years ago and I just ran across it, looking over the challenger schematic. Works great. half watt resistors were recomended. Don

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Next Topic: Sick sounding cabinets
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Jul 06 07:33:41 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software