VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Comment Board » Kustom Equalizer-need info (anybody know about this Kustom Equalizer?)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Kustom Equalizer-need info [message #26124] Wed, 17 May 2017 07:26 Go to next message
vintagefan is currently offline  vintagefan
Messages: 166
Registered: March 2014
Location: Dallas
Senior Member
I'm looking for info on a Kustom Equalizer I
have acquired.

It's got the same Kustom logo as my 1969
K100C-8 amps. It was probably stored away
all it's life. It looks new. It has 9 eq sliders. Can
anyone tell me what year it was made/sold?
Also it has one of it's rubber feet missing. Where
can I get a replacement? The rubber feet look
the same as many other electronic devices such
as stereo amplifiers, turn tables, cassette decks, etc.

The tag on the back of the equalizer says:
model: GRAPH-EQ
serial number: 142794

It has two 1/4" inputs.
one says:
1VRMS
The other input says:
MAX
What is supposed to be the difference
in each input? I don't hear any signifacant
difference in the two inputs. One may be a
little louder than the other.

Thanks..,,,..
Re: Kustom Equalizer-need info [message #26125 is a reply to message #26124] Wed, 17 May 2017 07:37 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
Well to take a age guess by your serial number I would say 1976" but Pleat could confirm the era better, or opening it up there are parts that can date it.
1 volt is = to zero db, that would be what's called line level signal as from the output needed from a mixing board or whatever that the input on the EQ is made to run on at maximum without clipping.

I can only guess that the max labeled input has more gain and is made to run on a input level of -10 db which is called non studio , or home use line level.

You can get rubber feet from antique electronics and other pedal building suppliers .

[Updated on: Wed, 17 May 2017 07:41]

Report message to a moderator

Re: Kustom Equalizer-need info [message #26127 is a reply to message #26125] Wed, 17 May 2017 17:05 Go to previous messageGo to next message
pleat is currently offline  pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi
Senior Member
Without a better description, I don't know what you may have. Kustom did a III Monitor amp which has a 7 band graphic EQ and it's power amp produced 135 watts into a 4 ohm load. Kustom did two versions, first virsion was in a hard tolex cabinet with silver front panel with the old Kustom Logo. The second version was the same system but housed in a black 19" rack mount front.

In the 1979 Kustom big K series, kustom did offer a stereo 10 band EQ known as the EQ-30 which was also rack mounted. If you can send me a few photo's at djt@chartermi.net I might have some more insite.

pleat
Re: Kustom Equalizer-need info [message #26128 is a reply to message #26127] Thu, 18 May 2017 09:04 Go to previous messageGo to next message
vintagefan is currently offline  vintagefan
Messages: 166
Registered: March 2014
Location: Dallas
Senior Member
Hey Pleat,

This Kustom equalizer I have is a stand alone unit.
It's about 10" wide, not a rack mount unit.
I emailed you a picture. I haven't figured out how
to post pictures here,
Re: Kustom Equalizer-need info [message #26130 is a reply to message #26128] Thu, 18 May 2017 19:10 Go to previous messageGo to next message
pleat is currently offline  pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi
Senior Member
I got the pictures, and from what I see as far as Kustom logo and the knobs for the sliders, I'd say it is mid 70's era.

Pretty cool piece of kustom history after the T&R amps were gone for the silver face tolex covered amps and PA's of the mid 70's.

pleat
Re: Kustom Equalizer-need info [message #26131 is a reply to message #26130] Thu, 18 May 2017 20:53 Go to previous messageGo to next message
vintagefan is currently offline  vintagefan
Messages: 166
Registered: March 2014
Location: Dallas
Senior Member
This Kustom equalizer has a clean sound and does not change the identity sound of my Fender Telecasters.

In the past, I haven't liked pedals of any kind. I plugged straight into my Kustom K100C-8's or K25C-2. When I have used various pedal equalizers such as a Boss EQ, they change the guitar's sound identity too much for my liking. When I used the various eq pedals, the tele's sound wasn't as full sounding and sounded more like a Fender Jaguar(thin sounding).

I use this Kustom Equalizer to add a bit of mids & hi's and the telecaster still sounds full and like a telecaster.

I guess what I'm hearing when using the various eq pedals I've used, is the sound seems to sound more digital, and this Kustom Equalizer seems to sound more analog, a fuller sound.
Re: Kustom Equalizer-need info [message #26132 is a reply to message #26124] Fri, 19 May 2017 09:58 Go to previous message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
Low bit rate A to D converters sound about a good as a MP3, there's a lot missing!
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Kustom amp, speaker output
Next Topic: Kustom 200A-4 2-15L
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun Nov 17 17:55:11 EST 2024