Cleaning grill cloth ?? [message #14437] |
Sun, 26 September 2010 16:43 ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
braud357
Messages: 154 Registered: July 2010 Location: Louisiana
|
Senior Member |
|
|
I have a recently-acquired 3-12 cabinet, and I am in the process of cleaning it up. The grill cloth is perfect - no snags, holes, or tears. But, it is kinda dirty ! What do you fellows suggest to clean it up, shy of tearing it apart completely ! What say you, kind gurus ?? THANKS ! Philip
|
|
|
|
|
Re: Cleaning grill cloth ?? [message #14442 is a reply to message #14441] |
Mon, 27 September 2010 05:43 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
pleat
Messages: 1454 Registered: June 2004 Location: Belding, Mi
|
Senior Member |
|
|
All good suggestions. I've posted a few times before, how I clean the grills. I remove the speakers, ports, name badge and completely remove baffle board from the cabinet. Head to the car wash and use the high pressure washer, wash and rinse, vaccuum off the excess water and let it dry in the sun for a hour. I'm not sure it's more work, but it removes dirt from the baffle board as well. It also gives me the chance to make sure all the nuts and bolts are tight when I reassemble, and you can really clean the dust on the T&R around the area that the baffle board is against. I use a paint brush to clean off dust and crud from the speaker cones, just be careful if the speakers have aluminum dust caps, the dent really easy.
pleat
|
|
|
|
Re: Cleaning grill cloth ?? [message #14446 is a reply to message #14443] |
Mon, 27 September 2010 09:26 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
C4ster
Messages: 686 Registered: June 2001 Location: Mukwonago, WI (Milwaukee...
|
Senior Member |
|
|
I just cleaned my "new" red K100 yesterday. I first removed the speaker and amp chassis. Then I used Spic and Span in water with a brush to clean the entire cabinet and then scrubbed the grill cloth with the bush. Then I used my Bissel steam cleaner to spray and vacuum the grill. After I finished the cleaning, I used an Armorall type product to make the cabinet all really shiny, and slippery too. But then I found 1 darker streak on the grill from the Armorall. I never thought to use Armorall on the grill, too. Thanks Pleat. Then I installed a JBL E140 into it and it really sings.
Conrad
|
|
|
|
Re: Cleaning grill cloth ?? [message #14455 is a reply to message #14454] |
Mon, 27 September 2010 21:20 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
rockzombie
Messages: 12 Registered: September 2010 Location: biloxi ms.
|
Junior Member |
|
|
What a coincidence,I pulled the grill cloth/frames out of my acoustic 371 cabinet by simply removing the 12 large bolt screws and back panel and pushing the grill frames out toward the front, EASY! Soapy water, a soft bristled brush and a garden hose and there clean. Then I look at my collection of Kustom cabinets, most of which have grill cloths that have never been cleaned and I think of all those wonderful little wood screws (41!) on the tall cabinets, not to mention that terrific goo sealer on the back panel(only gasoline or mineral spirits will clean up that horrid mess) not to mention the risk of a total interior disassembly and reassembly, and I did the logical thing, I opted to live with dirty grills. If you cannot reach both sides of the cloth and use water pressure to blast em clean, then they are never really clean. But I do have a 2 15" 15" siren horn cab. with bad cloth that will end up a winter project. My question: who has the exact speaker cloth? There are a few different mesh styles and I have 1 cabinet that has the silver thread cross hatch 1/2X1/2 inch pattern. I would keep bad cloth before installing the wrong cloth.
"turn up the volume and the distortion some more dude" is for players that may be hiding something.
|
|
|
Re: Cleaning grill cloth ?? [message #14458 is a reply to message #14455] |
Tue, 28 September 2010 08:37 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
C4ster
Messages: 686 Registered: June 2001 Location: Mukwonago, WI (Milwaukee...
|
Senior Member |
|
|
It isn't the baffle removal that I despise, it's the insulation. That stuff is horrid. I can even deal with the black shmutz, a scraper, mineral spirits and lots of paper towels. But lo and behold, not all cabinets have it. Why, I don't know. The insulation after all these years just falls apart and is really itchy. But then, what do you replace it with, New acoustic insulation is not black. Just paint it??? Why not, I guess. Yes, all of the speakers that I am listing are 16 ohm. I guess I forgot to mention that.
Conrad
|
|
|
Re: Cleaning grill cloth ?? [message #14462 is a reply to message #14437] |
Tue, 28 September 2010 12:12 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) |
chicagobill
Messages: 2005 Registered: April 2003
|
Senior Member |
|
|
Conrad, you're making me itch just reading this.
Some of the earlier cabinets that I've seen, have what looks like typical yellow fiberglass insulation that has been sprayed black around the inside of the port areas.
I would guess that that was standard procedure until they had the Kustom black insulation from the factory.
|
|
|