VintageKustom.com: Repairing Kustom Amps » reverb feedback problem

Home » VintageKustom.com » Repairing Kustom Amps » reverb feedback problem (K100C-8 4x10)

Show: Today's Messages :: Polls :: Message Navigator

reverb feedback problem [message #20744]

Wed, 11 June 2014 16:48

vintagefan
Messages: 166
Registered: March 2014
Location: Dallas

Senior Member

My K100C-8 4x10 has a reverb feedback problem. Mostly when I run the reverb at 7 or above(on a scale of 1 to 10). The more I turn the reverb down, the more the feedback lessons.....The reverb tank is one I had repaired. The original rubber cover on the tank deteriated when removing it, so I made a cardboard cover for the tank.

I'm wondering if installing a rubber backing to the cardboard cover with the rubber side facing down toward the springs might be the needed fix? Thought I'd ask your opinions what I should do first tho.

[Updated on: Wed, 11 June 2014 17:28]

Report message to a moderator

[Message index]

		reverb feedback problem By: vintagefan on Wed, 11 June 2014 16:48
		Re: reverb feedback problem By: chicagobill on Wed, 11 June 2014 17:35
		Re: reverb feedback problem By: vintagefan on Wed, 11 June 2014 18:32
		Re: reverb feedback problem By: stevem on Thu, 12 June 2014 07:15
		Re: reverb feedback problem By: vintagefan on Thu, 12 June 2014 08:36

Previous Topic:	adding an Effects Loop
Next Topic:	Need amp tech

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sat Aug 24 17:27:24 EDT 2024