VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Replacement Part Suggestions » Speaker cables
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Speaker cables [message #24790] Tue, 22 March 2016 16:31 Go to next message
slk854 is currently offline  slk854
Messages: 192
Registered: January 2015
Senior Member
What gauge speaker cables are recommended for our Kustom amps? I need to make up some with a straight on one end and a 90* on the other.

Steve
Re: Speaker cables [message #24791 is a reply to message #24790] Tue, 22 March 2016 17:32 Go to previous messageGo to next message
chicagobill
Messages: 2006
Registered: April 2003
Senior Member
It really depends upon how long they are, but for most normal lengths, 18 gauge zip cord is my favorite.
Re: Speaker cables [message #24794 is a reply to message #24790] Wed, 23 March 2016 08:39 Go to previous messageGo to next message
slk854 is currently offline  slk854
Messages: 192
Registered: January 2015
Senior Member
Can you still buy round 2 conductor cord, or are you talking about the flat 2 conductor zip cord?

Steve
Re: Speaker cables [message #24795 is a reply to message #24790] Wed, 23 March 2016 11:57 Go to previous messageGo to next message
chicagobill
Messages: 2006
Registered: April 2003
Senior Member
Either one will work, but I still get round two conductor, black rubber insulated cord from my local hardware store. I think the last time I got some, it was from Home Depot.
Re: Speaker cables [message #24798 is a reply to message #24790] Wed, 23 March 2016 13:02 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4774
Registered: June 2004
Location: NY
Senior Member
If your making your own cables an do not need it longer than 6 ft you can rid your house if some junk and cut the ends off one of the many IEC cables you likely have gathered up somewhere!
Re: Speaker cables [message #24799 is a reply to message #24790] Wed, 23 March 2016 19:04 Go to previous messageGo to next message
slk854 is currently offline  slk854
Messages: 192
Registered: January 2015
Senior Member
Cool ....Thanks Guys

Steve
Re: Speaker cables [message #25851 is a reply to message #24790] Fri, 03 February 2017 17:09 Go to previous messageGo to next message
dnlking1 is currently offline  dnlking1
Messages: 10
Registered: December 2016
Junior Member
Guitar center sells bulk speaker cabinet cable ! It is very heavy guage and adequate for the job !
Re: Speaker cables [message #25852 is a reply to message #25851] Fri, 03 February 2017 17:40 Go to previous messageGo to next message
slk854 is currently offline  slk854
Messages: 192
Registered: January 2015
Senior Member
Old post.........., but GC does not carry the round 2 conductor speaker cable that I know of, unless they just started carrying it. I found 50' of it though so since I posted. I have plenty now. I made up a dozen cables so far with right angle to straight 1/4' phono jacks.

Steve
Re: Speaker cables [message #25853 is a reply to message #25852] Fri, 03 February 2017 18:21 Go to previous messageGo to next message
dnlking1 is currently offline  dnlking1
Messages: 10
Registered: December 2016
Junior Member
Yes they do sell heavy guage round black speaker cable unless you live in a small town with a smaller GC ! I go to ours here in Denver and it is huge ! Anyway I just bought a bunch for the K200 B-5 and CTS columns and it was good stuff as I bought ends and made them up myself. Could not tell you the actual gague because I just sold the outfit three weeks ago. But you can find out if you get on their web site or call ! They had rolls of every kind of cable you could ever use for any purpose ! The cable I got was almost 3/8 in diameter barely fit in the jack sleeve !

[Updated on: Fri, 03 February 2017 18:22]

Report message to a moderator

Re: Speaker cables [message #25854 is a reply to message #25853] Sat, 04 February 2017 11:08 Go to previous messageGo to next message
pleat is currently offline  pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi
Senior Member
I use the AC cable I took off when I replace the AC cables with the grounded three pin plug. Waste not, want not.
pleat
Re: Speaker cables [message #25855 is a reply to message #25854] Sat, 04 February 2017 13:41 Go to previous message
Kustom_Bart is currently offline  Kustom_Bart
Messages: 601
Registered: October 2010
Location: Greenville, MichiGUN
Senior Member
I'm with Pleat, it works great!
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Metal cord wrap.
Next Topic: K100B-5
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Wed Nov 06 17:40:26 EST 2024