VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Comment Board » Repair advise (k200 A-4 )
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Repair advise [message #19121 is a reply to message #19117] Tue, 13 August 2013 15:08 Go to previous messageGo to previous message
chicagobill
Messages: 2006
Registered: April 2003
Senior Member
Without knowing what the 1.303 value refers to, I can't tell you if the jacks are okay or not. 1.303 megohms, kilohms, volts?

Yes, if you can hear sound through the output from the clipper then the signal should be passing the other circuits.

Set you meter up to read dc voltage. Attach the black lead to the chassis. Touch the red lead to the input of the boost/clipper circuit. There shouldn't be much voltage there if any, but touching the red lead to the audio input should cause a hum through the speaker. Just like touching the end of a guitar cord that is plugged into an amp.
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom 415B
Next Topic: Kustom logo for covers
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Nov 16 18:38:53 EST 2024