VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Kustom IV Lead Power Unit Ohm Question
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Kustom IV Lead Power Unit Ohm Question [message #9805] Mon, 27 October 2008 18:41 Go to next message
snakesalive is currently offline  snakesalive
Messages: 5
Registered: October 2008
Junior Member
hello, just won this beast on ebay and i was wondering what ohms it supports, i haven't received it yet, but reading the back through pictures didn't notice any info on the topic.

i have one 4/12 8ohm cab, will this work or am i going to blow something?

Thank you in advance

this is the model that doesn't have the 7 band graphic EQ

[Updated on: Mon, 27 October 2008 18:45]

Report message to a moderator

Re: Kustom IV Lead Power Unit Ohm Question [message #9808 is a reply to message #9805] Tue, 28 October 2008 06:30 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4747
Registered: June 2004
Location: NY
Senior Member
Hi.
That head will out put 125 watts RMS into a 4 ohm load, and all will be fine into your 8 ohm cabinet where it will output 75 watts RMS.
Do not run the amp at less than a 4 ohm load!

Report message to a moderator

Re: Kustom IV Lead Power Unit Ohm Question [message #9810 is a reply to message #9808] Tue, 28 October 2008 08:37 Go to previous message
snakesalive is currently offline  snakesalive
Messages: 5
Registered: October 2008
Junior Member
thank you! i got it sooner then i thought i would and ran it through the cabinet and it's all good. thank you for the info cause 1. it doesn't have anything written on the back in terms of ohms, and 2. i definitely plan to get more cabinets for this and will shoot for a 4ohm!

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: K100-6 (?) Schematics?
Next Topic: Tuck & Roll
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Thu Jun 27 12:51:11 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software