Need amp tech [message #20954] |
Tue, 15 July 2014 10:31 |
blue glow
Messages: 8 Registered: April 2014
|
Junior Member |
|
|
Hi, everybody. Still loving my K100/150 amp. It's noticeably down on pwr and my amp tech (for 40+yr) doesn't "do" solid state.
Does anyone know of a great tech in the Little Rock, AR area? -or, is the "best guy" a UPS arrangement?
Thx for any help,
David
"The only thing worse than not enough bassamp is too much guitar amp".
|
|
|
|
Re: Need amp tech [message #20957 is a reply to message #20956] |
Wed, 16 July 2014 12:27 |
blue glow
Messages: 8 Registered: April 2014
|
Junior Member |
|
|
Nope. Both 12's are working. It also did it with a 1x15 EV cab. The tech did find the 2 large cap's to be fairly off spec but couldn't find the huge hum (which I didn't have here).
Good suggestion but still needing the/a "best guy" at fixing my cool amp.
Thx again
"The only thing worse than not enough bassamp is too much guitar amp".
|
|
|
|
|
Re: Need amp tech [message #20960 is a reply to message #20954] |
Thu, 17 July 2014 06:38 |
stevem
Messages: 4772 Registered: June 2004 Location: NY
|
Senior Member |
|
|
David,depending where you live you could send the amp chassis to me and I can fix it for you ,I live in N.Y.
Are both channels in your amp acting the same with the low power issue and Hum?
Someone only 40 or so years old who can not deal with The transistors, no less the iC chips that some of these amps came with is just calling him or herself a tech and has no formal training in electronics I would have to say!
I guess the person only works on tube amps, but many many tube amps have have SS sections in them, and many of those sections run on smaller versions of power supply's like your Kustom has in it!
I wonder what your tech does in a tube amp when faced with a issue in the reverb section for example, many of which are Solid state in tube amps and or have SS regulator and DC voltage section for the tube filaments themselves.
[Updated on: Thu, 17 July 2014 06:53] Report message to a moderator
|
|
|
Re: Need amp tech [message #20961 is a reply to message #20960] |
Thu, 17 July 2014 10:23 |
blue glow
Messages: 8 Registered: April 2014
|
Junior Member |
|
|
The head has sn 41915 which I think is "Mar 70". The cab is a 150, hence the K100/150 platypus designation. Sorry to toss around terms like "tech"..no schooling but he's been fixing my Fender amps since we were kids..reverb also. And, yes, all inputs/channels are down.
It sounds like we've got some great Kustom amp tech's. I'll be in touch.
What a relief and what a great, supportive group.
Thx again,
David
ps: I'm near Little Rock, AR; Bumfuck, Egypt wouldn't be too far to fix this lovely head.
"The only thing worse than not enough bassamp is too much guitar amp".
[Updated on: Thu, 17 July 2014 10:25] Report message to a moderator
|
|
|