Casters for KG412 cabinet [message #15345] |
Tue, 01 March 2011 20:59 ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
ramrod250
Messages: 32 Registered: January 2011 Location: Germantown, Wisconsin
|
Member |
|
|
I just took delivery on a KG412 cabinet, and was surprised that it didn't ship with casters (and apparently doesn't come with them). But the mounting blocks for casters are there and ready, and so I wondered if anyone has suggestions about proper "replacement" casters. Even the image on the box shows casters, but none were there.
Thanks for your help.
Jim Haught
Creedence + Kustom: a great combination.
|
|
|
Re: Casters for KG412 cabinet [message #15365 is a reply to message #15345] |
Sat, 05 March 2011 14:07 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
stevem
Messages: 4764 Registered: June 2004 Location: NY
|
Senior Member |
|
|
Well if you are looking for the vintage Kustom type chrome roller casters, Peavey makes a real close copy and the only difference is a slightly smaller square mounting plate,my guess would also be that these are made in China so I would expext the chrome to not hold up anywhere as long as the orignals did!!
These can be had from antique electronics supply.
And in regards to mounting/placement, I think you have anwsered your own question, but basicly you want any caster to be as close to the cornors of the cab as possible.
[Updated on: Sat, 05 March 2011 14:11] Report message to a moderator
|
|
|
|
|