VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Replacement Part Suggestions » Fz952 transistor
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Fz952 transistor [message #16462] Fri, 25 November 2011 17:50 Go to next message
conductortom
Messages: 96
Registered: July 2010
Location: Okla
Member
Anybody know what transistor will cross over to an FZ 952? It's transistor Q711 on a PC 703 board. Thanks,
Tom

Report message to a moderator

Re: Fz952 transistor [message #16465 is a reply to message #16462] Sat, 26 November 2011 14:21 Go to previous messageGo to next message
chicagobill
Messages: 2006
Registered: April 2003
Senior Member
Q711 on my schematic is a 2N3638 transistor. The FZ952 is a Zener diode.

Report message to a moderator

Re: Fz952 transistor [message #16466 is a reply to message #16465] Sat, 26 November 2011 17:20 Go to previous messageGo to next message
conductortom
Messages: 96
Registered: July 2010
Location: Okla
Member
Ok. The schematic I'm looking at show an npn transistor with the collector not connected. I thought the symbol for a zener looked like a diode with a bent line. Please excuse my lack of knowledge. Just learning. Thanks

Report message to a moderator

Re: Fz952 transistor [message #16467 is a reply to message #16462] Sat, 26 November 2011 23:18 Go to previous messageGo to next message
chicagobill
Messages: 2006
Registered: April 2003
Senior Member
That transistor is being used as a diode, that's why there is no connection to the collector. And yes, a Zener diode is drawn just like a regular diode with a Z shaped line in the middle.

Report message to a moderator

Re: Fz952 transistor [message #16468 is a reply to message #16467] Sun, 27 November 2011 11:54 Go to previous messageGo to next message
conductortom
Messages: 96
Registered: July 2010
Location: Okla
Member
Thank you,Chicagobill

Report message to a moderator

Re: Fz952 transistor [message #16486 is a reply to message #16462] Thu, 01 December 2011 06:10 Go to previous messageGo to next message
GianettiCharles is currently offline  GianettiCharles
Messages: 1
Registered: December 2011
Location: 3715 Main St, Bridgeport,...
Junior Member
Transistor Q711 on a PC 703 board now crosses that Fz952 transistor.Its gives additional capacity for adopting energy for system.Its result good.

Tim Manning

Report message to a moderator

Re: Fz952 transistor [message #17491 is a reply to message #16486] Tue, 02 October 2012 06:09 Go to previous message
alacratstore is currently offline  alacratstore
Messages: 2
Registered: October 2012
Location: USA
Junior Member
Does these diodes support all functions as that of transistor or it is exactly same?? Can we use the Zener diode as the default one? And what would you say about Q711 transistor?

sewing

[Updated on: Tue, 02 October 2012 06:10]

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Few questions about replacement speakers
Next Topic: casters
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Nov 16 22:09:35 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software