VintageKustom.com: Wanted

Home » Classified Ads » Wanted » Chrome Port (Need parts/Have parts)

Show: Today's Messages :: Polls :: Message Navigator

Re: Chrome Port [message #21875 is a reply to message #21873]

Sat, 22 November 2014 02:46

chicagobill
Messages: 2006
Registered: April 2003

Senior Member

Pleat brings up a good point. I'm not certain when the change came about, but the later pots and knobs did have D shaped shafts. The flat side of the D is opposite from the pointer dot. This made assembly faster in the factory.

I checked the new knobs from Small Bear and the set screw is opposite from the pointer dot, so they should work perfectly with the D-shaft pots.

Report message to a moderator

[Message index]

		Chrome Port By: corrdk@aol.com on Wed, 19 November 2014 20:59
		Re: Chrome Port By: Iowa Boy on Thu, 20 November 2014 11:33
		Re: Chrome Port By: chicagobill on Thu, 20 November 2014 11:46
		Re: Chrome Port By: Iowa Boy on Thu, 20 November 2014 13:47
		Re: Chrome Port By: chicagobill on Thu, 20 November 2014 14:22
		Re: Chrome Port By: corrdk@aol.com on Thu, 20 November 2014 20:42
		Re: Chrome Port By: Iowa Boy on Fri, 21 November 2014 10:13
		Re: Chrome Port By: pleat on Fri, 21 November 2014 10:30
		Re: Chrome Port By: corrdk@aol.com on Fri, 21 November 2014 20:46
		Re: Chrome Port By: chicagobill on Sat, 22 November 2014 02:46
		Re: Chrome Port By: Iowa Boy on Sun, 23 November 2014 20:39
		Re: Chrome Port By: corrdk@aol.com on Sun, 23 November 2014 20:53
		Re: Chrome Port By: Iowa Boy on Mon, 24 November 2014 13:59
		Re: Chrome Port By: corrdk@aol.com on Mon, 27 April 2015 21:39
		Re: Chrome Port By: Iowa Boy on Mon, 27 April 2015 22:32
		Re: Chrome Port By: corrdk@aol.com on Tue, 28 April 2015 08:38
		Re: Chrome Port By: Iowa Boy on Tue, 28 April 2015 11:30

Previous Topic:	III Lead manual
Next Topic:	Handles for Kustom Lead III Cabinet

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Tue Nov 19 01:52:39 EST 2024