VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Replacement Part Suggestions » K 400b-4 (stereo amp?)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: K 400b-4 [message #20814 is a reply to message #20813] Sat, 28 June 2014 09:24 Go to previous messageGo to previous message
pleat is currently offline  pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi
Senior Member
You mentioned about sectioning off the horn area. I've often thought of removing the speaker board from a 3x15 cabinet, re install it upside down so the port tubes are on the lower half of the cabinet that would allow you to section off the upper area where the horn is. Basically turning the cab into a 2x15" for internal volume to match the 2x15" speaker cabinets.

On my cabinets, if the grill cloth is dirty, I remove the speakers and speaker board and head to the local car wash. Power soap and rinse, use the car vacuum to remove excess water and let it sit in the sun for a hour or so to dry it out, makes the grill cloth look brand new.

pleat
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 745 PA Amp
Next Topic: K-400b update
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Aug 10 23:43:28 EDT 2024