VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » K 400b-4 (stereo amp?)

Show: Today's Messages :: Polls :: Message Navigator

Re: K 400b-4 [message #20839 is a reply to message #20838]

Sun, 29 June 2014 19:58

rodak
Messages: 514
Registered: October 2001
Location: Georgia

Senior Member

Yeow! 2,500hz? Ok, so you'll need a higher cutoff crossover than the ones I'd suggested. The 2-way option might be worth considering, too - that's where the signal from the amp hits the crossover first, which splits it into separate low and high frequency outputs. That can make for a more even transition, I guess, although I think it would be more important in hi-fi stereo applications. It would be really hard to say which one would work/sound better. And remember, you're dealing with 16ohm drivers, and most crossovers are designed for 4ohm/8ohm drivers. Again, I'm not sure how the higher impedance affects the crossover frequency.

Shoot, just get a 4mfd 50v non-polar cap and be done with it!

Well, this has been fun thought exercise, anyway. I would love to someday have two 3x15 cabs with 2 15s and a horn to run my bass through (driven by a K200, of course). Hey, I can dream, can't I?

www.combo-organ.com

Report message to a moderator

[Message index]

		K 400b-4 By: Iowa Boy on Fri, 27 June 2014 02:40
		Re: K 400b-4 By: stevem on Fri, 27 June 2014 06:53
		Re: K 400b-4 By: pleat on Fri, 27 June 2014 07:07
		Re: K 400b-4 By: Iowa Boy on Fri, 27 June 2014 11:32
		Re: K 400b-4 By: pleat on Fri, 27 June 2014 21:45
		Re: K 400b-4 By: Iowa Boy on Sat, 28 June 2014 00:53
		Re: K 400b-4 By: stevem on Fri, 27 June 2014 11:44
		Re: K 400b-4 By: Iowa Boy on Sat, 28 June 2014 01:24
		Re: K 400b-4 By: stevem on Sat, 28 June 2014 06:37
		Re: K 400b-4 By: pleat on Sat, 28 June 2014 09:07
		Re: K 400b-4 By: pleat on Sat, 28 June 2014 09:24
		Re: K 400b-4 By: rodak on Sat, 28 June 2014 19:34
		Re: K 400b-4 By: Iowa Boy on Sun, 29 June 2014 02:32
		Re: K 400b-4 By: pleat on Sun, 29 June 2014 07:33
		Re: K 400b-4 By: Iowa Boy on Sun, 29 June 2014 02:36
		Re: K 400b-4 By: rodak on Sun, 29 June 2014 14:57
		Re: K 400b-4 By: Iowa Boy on Sun, 29 June 2014 16:08
		Re: K 400b-4 By: rodak on Sun, 29 June 2014 16:49
		Re: K 400b-4 By: Iowa Boy on Sun, 29 June 2014 18:13
		Re: K 400b-4 By: Iowa Boy on Sun, 29 June 2014 18:21
		Re: K 400b-4 By: rodak on Sun, 29 June 2014 19:32
		Re: K 400b-4 By: pleat on Sun, 29 June 2014 19:43
		Re: K 400b-4 By: rodak on Sun, 29 June 2014 19:58
		Re: K 400b-4 By: pleat on Sun, 29 June 2014 20:07
		Re: K 400b-4 By: Iowa Boy on Sun, 29 June 2014 22:33
		Re: K 400b-4 By: pleat on Sun, 29 June 2014 22:57
		Re: K 400b-4 By: Iowa Boy on Mon, 30 June 2014 00:44
		Re: K 400b-4 By: pleat on Mon, 30 June 2014 06:27
		Re: K 400b-4 By: rodak on Mon, 30 June 2014 10:54
		Re: K 400b-4 By: pleat on Mon, 30 June 2014 16:47
		Re: K 400b-4 By: Iowa Boy on Mon, 30 June 2014 11:57

Previous Topic:	745 PA Amp
Next Topic:	K-400b update

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Jul 13 09:45:28 EDT 2024