VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Comment Board » PA head 1145PA questions
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
PA head 1145PA questions [message #8718] Wed, 04 July 2007 10:25
bbird is currently offline  bbird
Messages: 13
Registered: July 2007
Location: MICHIGAN
Junior Member
Looking for any info on a 67? (based on your sn# chart), 4 channel PA Head model #1145PA I aquired about 20 years ago played through awhile and stashed. It has the Kustom by Ross black front plate and is black tuck and roll covered. I ran accoss it again and found this site (great site by the way!) I didn't see any info on the site for this model and was wondering if anyone knew the spec's for it and what the extra jacks on the back are for. 2 1/4" went to speakers but there is an rca jack I'm assuming went to a mixer? and another 1/4" jack I'm not sure of? Any info would be appreciated.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: feed back with volume down?
Next Topic: PA head 1145PA
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Tue Aug 20 23:50:34 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software