VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » 200B 5 PA head hum/hiss issue
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: 200B 5 PA head hum/hiss issue [message #28104 is a reply to message #28099] Thu, 11 March 2021 20:30 Go to previous messageGo to previous message
Drjones1106 is currently offline  Drjones1106
Messages: 19
Registered: March 2017
Location: Seattle
Junior Member
So I checked the +/-8v circuit, and it is off, but only a little. I don't know how much is grounds for concern. +7.9v and -7.79v. to me that seems close enough. I also don't see and small tan electrolytics on the power board. Only orange drops and tan ceramics. Next up I'll try adding some caps to the rectifier, but to clarify your saying 0.01uf @200v caps, and they should go across all the terminals? like one for every diode of the rectifier? I don't have any UF5404 diodes on hand, would something like a 1n4007 work? I think those are the highest voltage I have on hand. I would try and check the output transistors but I am nervous about removing them. As for matching them, would I just be trying to get Hfe matched?
Thanks again for the help.
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kasino Concert Lead
Next Topic: K200 B1 fuse value
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Mon Jul 08 07:46:59 EDT 2024