|
Re: master volume pot value K300 [message #8820 is a reply to message #8819] |
Wed, 22 August 2007 06:43 |
stevem
Messages: 4772 Registered: June 2004 Location: NY
|
Senior Member |
|
|
Hi, the K300 schematic can be had from this sites technical section for 10 dollars, but if you un-solder the pot and measure across its outer lugs (left and right) you will be able to tell its value with out a problem, as its the wiper (center lug) that is intermitant.
As far as the swt goes, if you get full size pot like the original, you can unfold the 4 tangs that hold the case to the pots face, remove the new case, and re-install the old case with the swt on it.
You only need make sure that on putting the old case on the new face, that the wiper is somewhere on its carbon track, other wise you may jam and lock up the pots rotation.
|
|
|
|