VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Comment Board » PA ENERGIZERS (Wattage)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: PA ENERGIZERS [message #21315 is a reply to message #21314] Mon, 01 September 2014 19:47 Go to previous messageGo to previous message
pleat is currently offline  pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi
Senior Member
The K400B-5 PA amplifier is a total of 200Watts RMS into two 4 ohm speaker cabinets. The amp has two 100 watt RMS power amps housed in one case.
The number of pre-amp channels has nothing to do with the output of the amp. If you were using a 16 channel mixer with no power amp, all you have is 16 channels to plug mic's or instruments into. You still need a power amp to drive the speakers and the power amp you choose, determines how much wattage or output to the speakers is how loud the system will produce.
Your K400 may have some issues if there isn't much volume, that should be looked at by a amp tech.
pleat
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 2-15 B cabinet
Next Topic: Error
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Mon Oct 14 23:45:33 EDT 2024