VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » A-4 Repair (Unwanted distortion)

Show: Today's Messages :: Polls :: Message Navigator

Re: A-4 Repair [message #26565 is a reply to message #26564]

Mon, 12 February 2018 16:07

Jonomega3
Messages: 81
Registered: November 2012

Member

"If your meter has a diode test function test all of the diodes and see what voltage readings you get when you test them. The meter will read the voltage at which the diodes conduct. You can use these voltages to select the right mix of diodes to get the bias right."
CR701 .5v,
CR702 .0000 both ways
CR703 .49v
I guess the open reading on CR702 may explain it?

"I know that the board had been messed with previously, did you get it all back to normal?"
Yes, I clean off all extra resistors and caps and replaced the four .82 ohm block resistors with proper value 1 ohm as well as the one 82k resistor as per the schematics. There no sign visually of burned resistors

"Have you checked the other voltages on the board?"
Havent measured the boards other voltages yet but will do that tonight carefully

"Any signs of burned resistors or wrong value components?"
No signs of burned resistors or leaky E caps and they test correctly with my ESR meter. I went through all the values of other components compared to schematics and all is as it should be.

[Updated on: Mon, 12 February 2018 16:15]

Report message to a moderator

[Message index]

		A-4 Repair By: Jonomega3 on Sat, 27 January 2018 08:20
		Re: A-4 Repair By: chicagobill on Sat, 27 January 2018 12:26
		Re: A-4 Repair By: Jonomega3 on Sun, 28 January 2018 00:28
		Re: A-4 Repair By: chicagobill on Sun, 28 January 2018 14:13
		Re: A-4 Repair By: Jonomega3 on Sun, 28 January 2018 15:44
		Re: A-4 Repair By: stevem on Mon, 29 January 2018 08:18
		Re: A-4 Repair By: Jonomega3 on Mon, 29 January 2018 21:16
		Re: A-4 Repair By: chicagobill on Mon, 29 January 2018 23:48
		Re: A-4 Repair By: stevem on Tue, 30 January 2018 12:07
		Re: A-4 Repair By: Jonomega3 on Tue, 30 January 2018 13:24
		Re: A-4 Repair By: stevem on Tue, 30 January 2018 15:24
		Re: A-4 Repair By: Jonomega3 on Wed, 31 January 2018 12:47
		Re: A-4 Repair By: stevem on Thu, 01 February 2018 08:23
		Re: A-4 Repair By: Jonomega3 on Thu, 01 February 2018 11:13
		Re: A-4 Repair By: Jonomega3 on Thu, 08 February 2018 15:12
		Re: A-4 Repair By: stevem on Fri, 09 February 2018 08:32
		Re: A-4 Repair By: Jonomega3 on Fri, 09 February 2018 12:54
		Re: A-4 Repair By: chicagobill on Fri, 09 February 2018 15:39
		Re: A-4 Repair By: Jonomega3 on Fri, 09 February 2018 17:07
		Re: A-4 Repair By: Jonomega3 on Fri, 09 February 2018 18:30
		Re: A-4 Repair By: chicagobill on Fri, 09 February 2018 23:46
		Re: A-4 Repair By: Jonomega3 on Sat, 10 February 2018 12:00
		Re: A-4 Repair By: chicagobill on Sat, 10 February 2018 23:54
		Re: A-4 Repair By: Jonomega3 on Sun, 11 February 2018 00:27
		Re: A-4 Repair By: stevem on Sun, 11 February 2018 06:24
		Re: A-4 Repair By: Jonomega3 on Sun, 11 February 2018 10:58
		Re: A-4 Repair By: chicagobill on Sun, 11 February 2018 15:41
		Re: A-4 Repair By: Jonomega3 on Sun, 11 February 2018 21:05
		Re: A-4 Repair By: Jonomega3 on Mon, 12 February 2018 10:10
		Re: A-4 Repair By: stevem on Mon, 12 February 2018 07:29
		Re: A-4 Repair By: Jonomega3 on Mon, 12 February 2018 09:04
		Re: A-4 Repair By: stevem on Mon, 12 February 2018 10:18
		Re: A-4 Repair By: Jonomega3 on Mon, 12 February 2018 10:41
		Re: A-4 Repair By: chicagobill on Mon, 12 February 2018 12:47
		Re: A-4 Repair By: Jonomega3 on Mon, 12 February 2018 13:25
		Re: A-4 Repair By: chicagobill on Mon, 12 February 2018 14:25
		Re: A-4 Repair By: Jonomega3 on Mon, 12 February 2018 16:07
		Re: A-4 Repair By: chicagobill on Mon, 12 February 2018 18:08
		Re: A-4 Repair By: stevem on Tue, 13 February 2018 07:39
		Re: A-4 Repair By: Jonomega3 on Tue, 13 February 2018 11:04
		Re: A-4 Repair By: chicagobill on Tue, 13 February 2018 16:40
		Re: A-4 Repair By: Jonomega3 on Thu, 26 July 2018 12:43
		Re: A-4 Repair By: chicagobill on Fri, 27 July 2018 00:02
		Re: A-4 Repair By: Jonomega3 on Sat, 28 July 2018 14:31
		Re: A-4 Repair By: stevem on Sun, 29 July 2018 06:06
		Re: A-4 Repair By: Jonomega3 on Sun, 29 July 2018 14:10
		Re: A-4 Repair By: Jonomega3 on Thu, 16 August 2018 11:45
		Re: A-4 Repair By: stevem on Thu, 16 August 2018 12:40
		Re: A-4 Repair By: Jonomega3 on Thu, 16 August 2018 13:14
		Re: A-4 Repair By: Jonomega3 on Thu, 16 August 2018 18:51
		Re: A-4 Repair By: stevem on Fri, 17 August 2018 06:51
		Re: A-4 Repair By: Jonomega3 on Fri, 17 August 2018 06:58
		Re: A-4 Repair By: stevem on Sun, 19 August 2018 06:15
		Re: A-4 Repair By: Jonomega3 on Mon, 20 August 2018 12:18
		Re: A-4 Repair By: stevem on Mon, 20 August 2018 12:27
		Re: A-4 Repair By: Jonomega3 on Fri, 24 August 2018 18:22
		Re: A-4 Repair By: chicagobill on Sat, 25 August 2018 00:15
		Re: A-4 Repair By: Jonomega3 on Sat, 25 August 2018 07:58
		Re: A-4 Repair By: Jonomega3 on Sat, 25 August 2018 11:43
		Re: A-4 Repair By: chicagobill on Sat, 25 August 2018 12:41

Previous Topic:	Kustom 300 PA head needs repair
Next Topic:	Kombo I organ keyboard contacts access

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Tue Dec 24 01:17:17 EST 2024