VintageKustom.com: Replacement Part Suggestions » Modern Replacement Reverb Tank for Kustom K100-2

Home » VintageKustom.com » Replacement Part Suggestions » Modern Replacement Reverb Tank for Kustom K100-2 (Need info about proper modern replacement reverb tank)

Show: Today's Messages :: Polls :: Message Navigator

Modern Replacement Reverb Tank for Kustom K100-2 [message #26886]

Sat, 18 August 2018 00:00

Lovguitar
Messages: 15
Registered: August 2018

Junior Member

After working on a Kustom K100-2 with broken reverb, I've eliminated one wiring problem and discovered that the short reverb tank that was gerry-rigged into place by the previous owner needs to be replaced. When I substitute in a good vintage tank, the reverb works fine. I've seen a number of threads about a good modern replacement but the threads arent't consistent. What modern reverb tank would be a "drop in" replacement for the original tank (or close at least).

Thanks!!

Paul

Report message to a moderator

Re: Modern Replacement Reverb Tank for Kustom K100-2 [message #26901 is a reply to message #26886]

Thu, 23 August 2018 02:13

rickdroit
Messages: 7
Registered: August 2018

Junior Member

I would buy a vintage one from Ebay, there is nothing like a good USA made spring reverb, Accutronics, Hammond/Gibbs are a couple of brands, I would avoid china made mod news stuff personally, like all the newer stuff, it has no soul

Report message to a moderator

Previous Topic:	K100-2 3754 Bias Diode
Next Topic:	Speakers for a K150

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sat Nov 02 05:15:07 EDT 2024