VintageKustom.com: Repairing Kustom Amps » Information on Voicing Control

Home » VintageKustom.com » Repairing Kustom Amps » Information on Voicing Control (Looking for wiring details for voicing control)

Show: Today's Messages :: Polls :: Message Navigator

Information on Voicing Control [message #29228]

Mon, 01 April 2024 21:39

KustomIILead
Messages: 1
Registered: March 2024

Junior Member

I am looking to find out exactly how the voicing control potentiometer is wired and what value potentiometer is used on amps such as the Kustom Lead III and similar. I have a wiring diagram for the board itself and a photo of one that shows a red, grey, and white wire terminating on the board, but I have no idea where the wires go when they leave the board.

The reason I ask is that I have a Lead II which has the voicing board inside it but it's not wired to a potentiometer on this amp (it's the exact same board though, the holes and traces exist to wire it in). I'd like to wire it up and see what it sounds like.

Thanks!

Report message to a moderator

Re: Information on Voicing Control [message #29229 is a reply to message #29228]

Tue, 02 April 2024 06:54

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

I can't say, but later I will look and see if my lead 4 is the same.
Meanwhile if you go to musicparts.com you can purchase the schematic on line and they will email it to you for 20 bucks.

Report message to a moderator

Re: Information on Voicing Control [message #29230 is a reply to message #29228]

Tue, 02 April 2024 17:19

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

I can't you because my Lead IV does not have that control.

Report message to a moderator

Previous Topic:	'69-'70 Kustom 100 2 power cord upgrade
Next Topic:	K250-1 bulbs in switches

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sat Nov 09 04:22:14 EST 2024