|
|
|
Re: Repair [message #28981 is a reply to message #28494] |
Wed, 15 March 2023 12:13 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
chicagobill
Messages: 2005 Registered: April 2003
|
Senior Member |
|
|
Those readings are normal for your reverb tank. They typically will read from 150-190 ohms.
Fender and some other amps use a tank that will read 1-2 ohms on the input side.
|
|
|
|
Re: Repair [message #28991 is a reply to message #28494] |
Tue, 21 March 2023 12:13 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
NLKustom
Messages: 50 Registered: March 2022
|
Member |
|
|
So Update.
I still haven't found out what the tech repaired on this amp, but ever since the tone sounds different.
When playing guitar through the amp the low E, A & D strings sound muffled. And the high E, B & G strings sound very sharp.
What would cause this? if they say they never fooled with the tone part of the amp?
Other than that everything is working good.
[Updated on: Thu, 05 October 2023 18:14] Report message to a moderator
|
|
|
|
|
|
|
|
|
|
|
Re: Repair [message #29225 is a reply to message #28494] |
Sun, 03 March 2024 05:21 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) |
stevem
Messages: 4764 Registered: June 2004 Location: NY
|
Senior Member |
|
|
These are not difficulty amps to work on just because there old, they are very simple common circuits that where used even in HI FI amps of the era.
In fact in terms of HI FI and good techs you might try to locate a certified HI Fi repair and restoration shop that you could ship the chassis off to.
|
|
|