VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » New guy-asking for your help!
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
New guy-asking for your help! [message #6914] Mon, 17 April 2006 21:36 Go to previous message
Swamp Gas is currently offline  Swamp Gas
Messages: 2
Registered: April 2006
Location: Slapout, Alabama
Junior Member
I know this forum is geared toward the tuck and roll set, but someone may be able to help me. I purchased a clean Kustom II bass head. It will not power up. I opened the case and discovered there is a fuse blown. The fuse is soldered on both ends into (is a part of) where the power comes into the amp. How do you go about changing the fuse? Are they still available? Is there another way to have a fuse link without soldering it in? Is this the way it came from the factory? Thanks in advance for your help!

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom 150-2
Next Topic: replacement grille material&black cabinet nagahyde
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Jul 13 03:09:31 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software