VintageKustom.com: Comment Board

Home » VintageKustom.com » Comment Board » Kustom HF drivers (make & model of Kustom HF drivers)

Show: Today's Messages :: Polls :: Message Navigator

Kustom HF drivers [message #27570]

Wed, 30 October 2019 14:07

johnnysynth
Messages: 46
Registered: June 2018

Member

What's the make & model of the Kustom high frequency drivers that
go in the 2L+1H-4 (that's a #4power unit driving a column spkr. with 2 X JBL 15" D130f's and
some sort of HF driver & lens which is what I'm trying to identify. I have the K250-4
head and I'm trying to buy or 'put together' that kind of speaker column. Even if
I could just find the T & R cabinet that'd be a start. The JBL's are pretty
easy to come by but so far the make and model of the HF driver/lens assy. is
a mystery.
Jake Welsh
johnnysynth@yahoo.com

Report message to a moderator

Re: Kustom HF drivers [message #27573 is a reply to message #27570]

Fri, 08 November 2019 07:17

stevem
Messages: 4774
Registered: June 2004
Location: NY

Senior Member

I still can not confirm this , but it would seem that just due to the depth of the top of cabinet Kustom had to work with that the driver used would have been a 804A and the horn a 811B.

Report message to a moderator

Re: Kustom HF drivers [message #27574 is a reply to message #27573]

Fri, 08 November 2019 07:28

johnnysynth
Messages: 46
Registered: June 2018

Member

Thanks Steve. There's one of those cabs for sale right now at Guitar Center so I'm trying to
get those guys to pull the back off and inspect it to see if it's all 'factory' installed stuff.
I'll report in when I get any results. I'll also ask them to get the model number off the
metal tag on the back of the speaker. I've seen this single 15" W/horn pictured in the literature
you published here so I know Kustom actually MADE them yeah?

Report message to a moderator

Re: Kustom HF drivers [message #27575 is a reply to message #27573]

Fri, 08 November 2019 08:18

johnnysynth
Messages: 46
Registered: June 2018

Member

lansingheritage.org shows the 802D and 804A (the 802D being slightly heavier duty) as both handling 30W
and typical X-over would be a N-800D crossing at 800hz coupled with an 811B sectoral horn. Both those
monsters spec out up to 22K. . .wow! Sounds a bit over spec'd for a guitar amp speaker but hey, you
never know about this Bud Ross guy.

Report message to a moderator

Re: Kustom HF drivers [message #27576 is a reply to message #27573]

Fri, 08 November 2019 12:17

johnnysynth
Messages: 46
Registered: June 2018

Member

Looking for Altec 804A driver on Ebay. . .wow. . .pretty pricey!
There must be a modern equivalent like an Emilar brand that'll
button up to the 811B horn
or something that's got equivalent specs without the
antique roadshow price. Even if I have to drill
new mounting holes in the 811B plate. Course, we haven't even determined
for shure if the 804A was the one they used yeah? Using the 811B horn
is no big deal. There's tons of them out there for not too much $ and
there's no moving parts to wear out! The cross-over network on the other hand. . .
I would have crossed it at 1200hz to allow the woofer to
cover more for a warmer sound but of course i'm not Bud Ross!
I can't believe they marketed the horn loaded cab for guitar
amp use. . .WTF. Most guitar players (I think even back in
the day) didn't want full banded sound reenforcement type
sound. Well, again, I'm not Bud Ross. I guess there
were a few guys with keyboards that wanted
full spectrum sound. . .that would have made sense
since he was selling those combo organs. . .I forgot about those!
I WANT that kind of sound cuz I play electric piano. . .
that's why I want the horn loaded set-up.
Bud was thinking of me. . .how nice!
Jake Welsh

Report message to a moderator

Re: Kustom HF drivers [message #27600 is a reply to message #27570]

Sun, 01 December 2019 12:32

Kustom_Bart
Messages: 601
Registered: October 2010
Location: Greenville, MichiGUN

Senior Member

I have cabs both ways with Altecs and JBLs and prefer the altecs for full range sound. I use 2 of them for PA mains and run in stereo with 2 18" subs The JBLs are just a little more harsh to my ear. The D140 is a great bass driver though. I have a bunch of all

Report message to a moderator

Previous Topic:	New Music Store in Dewey, OK full of Kustom's
Next Topic:	Your Favorite Kustom (or General) Gear

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Wed Nov 06 20:51:53 EST 2024