VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Replacement Part Suggestions » Amp feet
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Amp feet [message #25124] Mon, 27 June 2016 23:33 Go to next message
slk854 is currently offline  slk854
Messages: 192
Registered: January 2015
Senior Member
Anyone have any suggestions on where/if you can find replacement feet for the bottoms of the Kustom amps? These are the 4 round chrome feet with the screw in the middle.

Thanks
Steve

Report message to a moderator

Re: Amp feet [message #25128 is a reply to message #25124] Tue, 28 June 2016 06:55 Go to previous messageGo to next message
pleat is currently offline  pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi
Senior Member
Peavey has the large metal glides.
pleat

Report message to a moderator

Re: Amp feet [message #25141 is a reply to message #25128] Thu, 30 June 2016 18:54 Go to previous messageGo to next message
Iowa Boy is currently offline  Iowa Boy
Messages: 767
Registered: June 2014
Senior Member
How many do you want? I take them off all my amps since they leave marks on the speaker cabinets. I don't see the need for them if the amp is sitting on the speaker anyway. In time they rust and leave rust marks on the cabinets.

Report message to a moderator

Re: Amp feet [message #25145 is a reply to message #25124] Thu, 30 June 2016 20:50 Go to previous messageGo to next message
slk854 is currently offline  slk854
Messages: 192
Registered: January 2015
Senior Member
Just 4 of them. What do you want for them?

Steve

Report message to a moderator

Re: Amp feet [message #25146 is a reply to message #25124] Thu, 30 June 2016 23:05 Go to previous messageGo to next message
Iowa Boy is currently offline  Iowa Boy
Messages: 767
Registered: June 2014
Senior Member
How about $5 plus the shipping which will be next to nothing.

Report message to a moderator

Re: Amp feet [message #25149 is a reply to message #25124] Fri, 01 July 2016 12:09 Go to previous messageGo to next message
Iowa Boy is currently offline  Iowa Boy
Messages: 767
Registered: June 2014
Senior Member
That's $5 for all four.

Report message to a moderator

Re: Amp feet [message #25158 is a reply to message #25124] Mon, 04 July 2016 12:31 Go to previous messageGo to next message
slk854 is currently offline  slk854
Messages: 192
Registered: January 2015
Senior Member
Thanks for the offer but I ordered 4 new ones for $4.35 with free shipping. I think they are better left on. Those chassis screws will tear the naguhide if not covered by something. The feet keep the amp off of those screws.

Report message to a moderator

Re: Amp feet [message #25159 is a reply to message #25124] Mon, 04 July 2016 12:55 Go to previous messageGo to next message
Iowa Boy is currently offline  Iowa Boy
Messages: 767
Registered: June 2014
Senior Member
All my amp heads have the recessed rounded screw heads on them. No way they can damage the T&R. I have had one that had bolts in it which I assumed were not original so I replaced them with the rounded stainless steel ones.

Report message to a moderator

Re: Amp feet [message #25160 is a reply to message #25124] Mon, 04 July 2016 14:20 Go to previous message
slk854 is currently offline  slk854
Messages: 192
Registered: January 2015
Senior Member
The screws are 8/32 round head phillip screws with a washer under them. I do suppose that if you tighten them up enough you can get them below the level of the naguhide, but then you risk cutting the naguhide with the washer. The situation I am talking about is when someone uses an electric driver to remove or put the screws in you can bugger up the phillips head slot and leave a rather sharp lip on those screws. You will find similar situations on the back cover of the speaker cabs where someone had let the driver hop out of the Philips slot and bugger the screw up and create a sharp edge. If you are careful then there are no problems.

Steve

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Speaker replacement
Next Topic: Kasino Cabinet Casters
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Mon Nov 04 05:47:04 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software