VintageKustom.com: Comment Board » need part transformer

Home » VintageKustom.com » Comment Board » need part transformer

Show: Today's Messages :: Polls :: Message Navigator

need part transformer [message #8437]

Fri, 16 March 2007 11:19

serabul
Messages: 10
Registered: March 2007
Location: home

Junior Member

Can anyone tell me if the old transformers from the early k 200b-1 be rebuilt if not I NEED ONE can enyone help send me in write direction Evil or Very Mad

thanks serabul

Report message to a moderator

Re: need part transformer [message #8441 is a reply to message #8437]

Mon, 19 March 2007 07:02

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

It cost more to rebuild one than to get a new one,Avel transformers in CT has great toroidal tramsformers, and I think the one you need is part number Y236603, but I would check with them on how many voltamps the new transformer needs to be, the old transformer put out 40 volts to a bridge type rectifier.
This will not mount like the original kustom part, you will have to get 2 steel L BRACKETS to bolt to each side to stand it up where the old one was mounted as I do not think there will be room to mount it flat where the old one was.
I your original transformer is bad, make sure the diodes or not shorted also!

Report message to a moderator

Re: need part transformer [message #8442 is a reply to message #8437]

Mon, 19 March 2007 07:43

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

I also think a hammond manufacturing part number 167L44 will work, but it has a center tap lead that you would not use.
This is a standartd X type mounting transformer like the original, but I would still call them to check if my choise was correct.

Report message to a moderator

Re: need part transformer [message #8474 is a reply to message #8442]

Thu, 29 March 2007 20:53

Haltone
Messages: 16
Registered: March 2000
Location: Syracuse NY

Junior Member

I have several parts amps. Post the part number on the transformer or email to me. Hal

Report message to a moderator

Previous Topic:	Would appreciate any info on my Kustom Amp
Next Topic:	Hi folks, newbie here seeking a little info about a used Kustom combo

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sun Nov 17 00:03:56 EST 2024