VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » K150-6 Preamp Schematic
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
K150-6 Preamp Schematic [message #16272] Mon, 17 October 2011 15:11 Go to next message
JoeT is currently offline  JoeT
Messages: 13
Registered: December 2010
Location: Wynantskill, NY
Junior Member
Hi guys, thought I would check again to see if anyone had the schematics for the PC5035 or PC5036 board for the K150-6 bass amp. Either schematic would do. Have been trying to interface a separate power amp into the chassis to replace the original which was missing when I bought the amp. Have found both preamp boards in the amp have a .2 to .3 DC offset on their output signal line. Would like to go thru the board and see if I can get this closer to zero. I would appreciate it if someone had one of these preamp schematics and could email me a copy.

Thanks
Joe Treiber
treiber@troybelting.com

Report message to a moderator

Re: K150-6 Preamp Schematic [message #16275 is a reply to message #16272] Tue, 18 October 2011 07:25 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4754
Registered: June 2004
Location: NY
Senior Member
I have to look tonight for you.

Report message to a moderator

Re: K150-6 Preamp Schematic [message #16277 is a reply to message #16272] Tue, 18 October 2011 08:13 Go to previous message
JoeT is currently offline  JoeT
Messages: 13
Registered: December 2010
Location: Wynantskill, NY
Junior Member
Thanks every one, Don has sent me the schematic I needed.
Now on to fix or rebuild the boards.

Thanks Don

Joe Treiber

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Challenger
Next Topic: Refurbiing amp
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Jul 20 06:56:36 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software