VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Comment Board » Odd Size Kustom Speaker Cabinet???
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Odd Size Kustom Speaker Cabinet??? [message #24209] Tue, 08 December 2015 15:48 Go to next message
mister honey is currently offline  mister honey
Messages: 38
Registered: January 2014
Location: eastern blowville heights...
Member
I've seen photos of what appears to be a K250 (straight sides, no taper) cabinet, which is 27 pleats or 54 inches tall by 14 pleats or 28 inches wide.

It is obviously wider than the K200 head sitting on it.

Is this a PA cabinet or a one off special or???

Mike

Report message to a moderator

Re: Odd Size Kustom Speaker Cabinet??? [message #24210 is a reply to message #24209] Tue, 08 December 2015 16:59 Go to previous messageGo to next message
Kustom_Bart is currently offline  Kustom_Bart
Messages: 601
Registered: October 2010
Location: Greenville, MichiGUN
Senior Member
Would need to see a pic, btketner@charter.net however should only have 10 (k100) 11 (Frankenstein) 12 pleats k200/k250 so 20", 22" and 24" wide. If I see a pic I may be able to tell you what it is if it is a decent quality pic. Does it have black grill cloth or black with silver in it? What is the logo plate on the grill?

[Updated on: Tue, 08 December 2015 17:02]

Report message to a moderator

Re: Odd Size Kustom Speaker Cabinet??? [message #24213 is a reply to message #24209] Tue, 08 December 2015 23:46 Go to previous messageGo to next message
Iowa Boy is currently offline  Iowa Boy
Messages: 767
Registered: June 2014
Senior Member
Sounds like a PA cabinet that originally had the horn in the top of it. Horns wouldn't fit in the slanted cabinets. Is there a bolt hole on the back panel that would have been fastened to the horn bracket?

Report message to a moderator

Re: Odd Size Kustom Speaker Cabinet??? [message #24216 is a reply to message #24209] Wed, 09 December 2015 07:05 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4773
Registered: June 2004
Location: NY
Senior Member
If the head sitting on top in the photo you describe is a early Frank model then that's why it's width is not that of the speaker cabinet.

Report message to a moderator

Re: Odd Size Kustom Speaker Cabinet??? [message #24217 is a reply to message #24216] Wed, 09 December 2015 18:12 Go to previous message
Kustom_Bart is currently offline  Kustom_Bart
Messages: 601
Registered: October 2010
Location: Greenville, MichiGUN
Senior Member
I am waiting for some more pics, but at this time, I would have to say home made, until I get further pics to provide more info. It is a K200 12 pleat head sitting on a 14 pleat cab that has no puffy tuck and roll. The T&R is there just rather flat and the cab is 4" wider than the head, no handles, no grill logo emblem.

[Updated on: Wed, 09 December 2015 18:15]

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Speaker brands used in Kustom combos
Next Topic: Green Tuck&Roll???
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun Nov 03 22:39:17 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software