VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » speaker wiring
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
speaker wiring [message #3244] Mon, 17 November 2003 13:50 Go to next message
bigben
Messages: 5
Registered: November 2003
Junior Member
I have a kustom k200b it says 100 watts on the back i just bought a two 15 cabinet black tuck and roll to match the head i have two brand new peavey 1502 8ohm blackwidows to put in the cabinet should i wire them pos. to neg from one to the other and then positive to neg on speaker jack to make them 4 ohm or is there another way and what is the recomended ohmage on this head thanks... oh and where can i get new capacitors for this amp they say it makes them sound like new? thanks Bassman 50

Report message to a moderator

Re: speaker wiring [message #3249 is a reply to message #3244] Tue, 18 November 2003 14:22 Go to previous message
KustomBlues
Messages: 494
Registered: June 2001
Location: Michigan
Senior Member
Wire it parallel for a 4 ohm load + to + and - to -. Enjoy! :-) Deb

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: hole in speaker
Next Topic: VIRM-PA Schematics needed
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Nov 16 20:02:48 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software