VintageKustom.com: Repairing Kustom Amps » 795 Speaker Recommendation

Home » VintageKustom.com » Repairing Kustom Amps » 795 Speaker Recommendation (Blown speaker)

Show: Today's Messages :: Polls :: Message Navigator

795 Speaker Recommendation [message #27464]

Tue, 30 July 2019 14:48

JDinPA17603
Messages: 69
Registered: May 2018
Location: Lancaster, PA

Member

Seems someone had attempted a repair on one of the original 12" speakers - it developed a rub and took a dive on me last week😢
Wondering if I should get a recone kit from Weber or install a replacement.
Thoughts, suggestions, specs appreciated.
Thanks in advance,
.
John

Old Us Navy Vietnam Vet
Playing for my own enjoyment and irritation of the neighbors.

Report message to a moderator

Re: 795 Speaker Recommendation [message #27465 is a reply to message #27464]

Tue, 30 July 2019 16:49

thetragichero
Messages: 33
Registered: April 2019

Member

this one of the alnico jobbers? i have one that i repaired a tear in. sounds killer but I'm up to my eyeballs in speakers. unsure if this one has the metal dust cap or, but i'd be willing to send it to you if you paid shipping

Report message to a moderator

Re: 795 Speaker Recommendation [message #27466 is a reply to message #27464]

Wed, 31 July 2019 06:02

stevem
Messages: 4773
Registered: June 2004
Location: NY

Senior Member

I don't understand which model it is that you have as the L795 model has a 2-15" cab.

Are you referring to the 745 PA model that uses 12" drivers.

At any rate if it's one of the original drivers and you care about maintaining the valve of the amp then, yes I would send it to Weber for a re-cone job, but only you Can answer that question !

Report message to a moderator

Re: 795 Speaker Recommendation [message #27471 is a reply to message #27464]

Mon, 05 August 2019 20:34

JDinPA17603
Messages: 69
Registered: May 2018
Location: Lancaster, PA

Member

Sorry for the delay...family matters came to forefront this past week.

Steve, you are correct. 745PA 12" speakers - one of four in column.

Thetragichero, have to pull the back off to check, will update soon as I see. If you have a match I would take you up on the offer.

These do have the metal dust cap. I will get back to you on this ...
Otherwise I will be ordering a kit to recone it.

Got a JBL D-130F on the bench right now that I am reconing, so I'm not adverse to that route either.

Thanks to both for the reply.
John

Old Us Navy Vietnam Vet
Playing for my own enjoyment and irritation of the neighbors.

[Updated on: Mon, 05 August 2019 20:35]

Report message to a moderator

Previous Topic:	Kasino u100-p (Club) and u200-p (Concert) repair
Next Topic:	Vintage circa 1966 "Frankenstein" amp

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sun Nov 03 16:37:10 EST 2024