VintageKustom.com: Comment Board

Home » VintageKustom.com » Comment Board » 150 PA column (Speaker question)

Show: Today's Messages :: Polls :: Message Navigator

150 PA column [message #28579]

Thu, 12 May 2022 10:57

NLKustom
Messages: 50
Registered: March 2022

Member

I picked up a single Kustom 150 PA column. Still looking for the other one.
The markings on the four speakers inside reads:
Danity 16F-100A, 6 1/2" 8ohm 60w Made in Taiwan R.O.C.

Would these be the original speakers for this cabinet?
And is that an 8" speaker?, because they seem smaller.
It has the "Kustom" nameplate on the grill, with the logo offset to the left of the mounting screws and raised lines in the background. Other logo's I've seen have got a smooth background with the 'Kustom' logo centered between the two screws.
Serial #41516

The literature doesn't list anything smaller than an 8" speaker or 150 watts. But these speakers say they're 60 watts. Plus I think they are blown, they sound very crackly and high pitched.

[Updated on: Thu, 12 May 2022 11:11]

Report message to a moderator

[Message index]

		150 PA column By: NLKustom on Thu, 12 May 2022 10:57
		Re: 150 PA column By: stevem on Thu, 12 May 2022 18:14
		Re: 150 PA column By: NLKustom on Thu, 12 May 2022 18:45
		Re: 150 PA column By: stevem on Thu, 12 May 2022 19:18
		Re: 150 PA column By: NLKustom on Fri, 13 May 2022 09:35
		Re: 150 PA column By: stevem on Fri, 13 May 2022 11:45
		Re: 150 PA column By: NLKustom on Fri, 13 May 2022 13:52
		Re: 150 PA column By: NLKustom on Mon, 16 May 2022 15:51
		Re: 150 PA column By: stevem on Mon, 16 May 2022 16:46
		Re: 150 PA column By: NLKustom on Mon, 16 May 2022 21:46
		Re: 150 PA column By: stevem on Tue, 17 May 2022 06:11
		Re: 150 PA column By: NLKustom on Tue, 17 May 2022 09:47
		Re: 150 PA column By: stevem on Tue, 17 May 2022 11:28
		Re: 150 PA column By: NLKustom on Tue, 17 May 2022 11:46
		Re: 150 PA column By: NLKustom on Sat, 25 June 2022 21:18
		Re: 150 PA column By: stevem on Mon, 27 June 2022 05:42

Previous Topic:	Speakers
Next Topic:	Ports History

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Mon Mar 03 09:17:59 EST 2025