KUSTOM 200Watt guitar head, transistors????? [message #7881] |
Wed, 15 November 2006 23:11 ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
stephen?
Messages: 11 Registered: November 2006 Location: Vancouver
|
Junior Member |
|
|
hello everyone, im having a little problem, i came across a kustom 200 watt guitar head a few months ago, so i test it out through my buddys mesa cab, and the channels were all crackly and noisy, so i take it to a shop in vancouver and the guy says the transistors for all 4 channels are shot, and they havent been made for 15 years, he can order the parts and it will take 2-3 weeks and it will cost me $200-300, its been there ever since and i call today to check up, and he hasnt been able to get a hold of any yet, does anyone know where to obtain the right tranistor??? HELP!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Re: KUSTOM 200Watt guitar head, transistors????? [message #7920 is a reply to message #7881] |
Tue, 12 December 2006 06:44 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) |
stevem
Messages: 4788 Registered: June 2004 Location: NY
|
Senior Member |
|
|
I do not know what to tell you at this point, but if you have a RCA male to 1/4 inch male cord plug it in to the back of the amp and see if you can drive another guitar amp with its output signal, if you can than the preamp section(s) are ok and the problem is in the driver/output stage.
|
|
|