VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Replacement Part Suggestions » Replacement fuse in K200A-2 after 110 -> 230V conversion
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Replacement fuse in K200A-2 after 110 -> 230V conversion [message #28899] Tue, 17 January 2023 05:13 Go to previous message
claussoegaard is currently offline  claussoegaard
Messages: 27
Registered: July 2022
Junior Member
Possibly/probably/definitely a dumb or noob-ish question.. But here goes. After converting my K200A-2 to 230V after moving to Europe, I should replace the fuse, right? More voltage = less current, right? So the stock 3 amp fuse should be replaced by a 1.5A fuse, yeah?

And the speaker fuse I should leave alone right? Since that happens after the power transformer, where things are the way the were before the conversion. Yeah?

And any parts numbers recommendation from Mouser? Not sure if it should be slo or fast blow.

Thanks!

Report message to a moderator

[Message index]
 
Read Message
Read Message
Previous Topic: Suggestion for replacement filter caps on K200A-2?
Next Topic: Transistor replacements anno 2023
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun Feb 09 23:35:12 EST 2025
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software